Using ratio of crosslinking agent

When using crosslinking agent, should avoid to add acid packing, also be careful when adding antioxidants and other aromatic oil additives on crosslinking effects will have bad influence, it is important to note that.About the use of the crosslinking agent ratio has eight pay attention to the point.
First, epoxy resin can be through based on acids, amines, amino resin, isocyanate, phenolic resin, such as, cold & heat curing crosslinking system;
Second, the amino resin can through based on isocyanate, carboxylic acid or anhydride, epoxy resin, phenolic resin, such as, cold & heat curing crosslinking system;
Third, can be based on acids, phenolic resin, epoxy resin and isocyanate, carries on the cold & hot crosslinking curing system;
Fourth, can be based on alkyd resin acids, amines, amino resin, isocyanate, phenolic resin, peroxide, light initiator, etc., for cold & hot crosslinking curing system;
Fifth, the acrylic resin can be based on amine, amino resin, epoxy resin, acrylic acid ester, phenolic resin, free radicals, such as for cold & hot crosslinking curing system;
Six, polyethylene can be based on peroxide, silane crosslinking, including alcohol, electron beam
Seven, regular elastomer can be based on sulphur, peroxide, acrylic acid ester, etc, for cold & hot crosslinking curing system;
Eight, special elastomer can be based on a metal oxide, silicon alkoxide, resin, amine, cold & hot crosslinking curing system.

(source:http://www.ac-chem.net/news/crosslinking-agent-22-b1da.html)